I just realised that I wrote this tutorial for Leanne from shecanquilt but never shared it here. So, here you go!
I came up with this idea after I got annoyed with my sewing machine sliding around on the table, especially when I was sewing quickly or free-motion quilting. It makes such a difference to have a sewing machine that stays where you want it to! It also adds a lovely personalised touch to your sewing space.
I came up with this idea after I got annoyed with my sewing machine sliding around on the table, especially when I was sewing quickly or free-motion quilting. It makes such a difference to have a sewing machine that stays where you want it to! It also adds a lovely personalised touch to your sewing space.
What you will need:
- feature fabric
- low loft cotton batting
- backing fabric
- non-slip matting
- fabric for binding
- basting pins (curved safety pins)
- sewing machine with walking foot
- usual notions like thread, rotary cutter and ruler, scissors, etc.
Tips before you start:
It's a good idea to read the full tutorial all the way through before you start.
The thing that makes this mat non-slip is this non-slip matting. It's the type of thing you might put in a cupboard or drawer to stop things sliding around. These pictures are intended to give you a good idea of what it's like.
I bought mine at Spotlight (essentially the equivalent to Joann's), but you can also find it at hardware stores and big box homeware stores. You can find the exact brand I bought here, and this is a version which looks pretty much the same which I found on amazon. The colour doesn't really matter, because you won't see it once your mat is finished.
Step 1 - Create the top of your mat
First, measure your sewing machine to work out how big your mat should be. I would recommend measuring the base of your sewing machine and then adding at least 2" on each side. I have a fairly small sewing machine and I made mine 12" by 18".
Choose the fabric you will use for the top of your sewing mat. I used a single cheater print fabric, but you could definitely piece something if you prefer. Make a quilt sandwich with your feature fabric, the low loft cotton batting, and your backing fabric, using your preferred method. Quilt as desired. I simply followed the lines of my cheater print fabric.
Step 2 - Mark your quilting lines
You are going to baste the non-slip matting to your quilt top, and stitch through all the layers to securely attach it. You don't need to quilt it densely, just enough to make sure it doesn't bubble or move around too much. Once you have decided on your quilting lines, use your favourite method to mark them on the quilt top.
You can see that I used a hera marker - it's absolutely my favourite way to mark quilting lines. This is the one I have and I love it.
Step 3 - Baste on the non-slip matting
Use the curved safety pins to base the non-slip matting to your quilt top. Place them not more than 4" apart, and if possible, avoid placing them on your quilting lines.
You are going to baste the non-slip matting to your quilt top, and stitch through all the layers to securely attach it. You don't need to quilt it densely, just enough to make sure it doesn't bubble or move around too much. Once you have decided on your quilting lines, use your favourite method to mark them on the quilt top.
Use the curved safety pins to base the non-slip matting to your quilt top. Place them not more than 4" apart, and if possible, avoid placing them on your quilting lines.
Step 4 - Quilting
This part is a little tricky, and you will really need a walking foot, because the non-slip matting is going to want to stick to your sewing machine. Get your quilt set up and ready to go, and drop the needle down. You may need to lengthen the stitch length beyond what you would normally use for straight-line quilting - I set mine at about 3.75 (the maximum stitch length on my machine is 4).
I would normally use a flat hand to gently guide the fabric through the machine. This will not work, because putting any pressure on the quilt will cause it to stick to the sewing machine. What you need to do is lift the quilt up around the presser foot, and let the feed dogs and your walking foot do their job. It will feel really strange, but if you go slowly and carefully, it will work.
Step 5 - Binding
This part is a little tricky, and you will really need a walking foot, because the non-slip matting is going to want to stick to your sewing machine. Get your quilt set up and ready to go, and drop the needle down. You may need to lengthen the stitch length beyond what you would normally use for straight-line quilting - I set mine at about 3.75 (the maximum stitch length on my machine is 4).
I would normally use a flat hand to gently guide the fabric through the machine. This will not work, because putting any pressure on the quilt will cause it to stick to the sewing machine. What you need to do is lift the quilt up around the presser foot, and let the feed dogs and your walking foot do their job. It will feel really strange, but if you go slowly and carefully, it will work.
Step 5 - Binding
This project is a great candidate for machine stitching the binding. I learned from Rita at Red Pepper Quilts, and I still think her tutorial is the best. If you do decide to hand stitch the binding, I would recommend attaching it to the back first and hand stitching it to the front.
Ta da - you're finished! Now you just need to test drive your new sewing machine mat - a perfect excuse to sew something new!
P.S. You will have a fair bit of the non-slip matting left over - try putting a piece under your sewing machine pedal. It will stop creeping away from you as you sew!
17 comments:
This is so clever and cute, I want to make one!
Thanks for this! You've simplified the process enough that I feel like I can sit down, get it done, and have solved one problem.
I love this idea! I bought some of this non-slip 'stuff' at the Reject Shop- it was MUCH cheaper than Spotlight! I wanted to make a non-slip pad for my sewing foot! Now I will have a matching set! Here's the tutorial I was going to use!
http://so-sew-easy.com/non-slip-sewing-machine-foot-pedal-pad/
cheers! Susan
The disappearing under the table foot pedal is very annoying! Good solution. Thanks!
I use that non-skid product under my machine, but never thought to make it pretty. Thanks for a FABULOUS idea!!
To stop the non-stick matting from sticking to your machine as you quilt, could you quilt it upside down? I need one of these as when i press the knee lift on my new machine, my whole machine slides to the side!
To stop the non-stick matting from sticking to your machine as you quilt, could you quilt it upside down? I need one of these as when i press the knee lift on my new machine, my whole machine slides to the side!
Maszyna super, podkładka piękna :)
To stop the rubberized mat from sticking while sewing try using a piece of easy tear paper (i.e. wax paper, phone book paper) sandwiched against the matting. Then tear the paper away once you have finished sewing.
I have the rubberized mat under my machine under another pretty mat but never thought to combine the two, but I will now. Thanks.
tushaythreeatyahoodotcom
My machine does not slip, but I am so-o-o making a non slip mat for my foot pedal! Thanks for the idea!
I have an artist 7258 and battled with the self threader. I now have a Brother Disney and the self threader is so awesome. I am truly satisfied with this machine. http://www.zentiz.com/singer-7258-stylist-award-sewing-machine-review/
This will not work, because putting any pressure on the quilt will cause it to stick to the sewing machine. remalladora
It's a truly awesome approach to enhance and complete your bed cover and sewing ventures. The heavier weight string is a substantially more emphasized join, and is see ideal for stressing. The singer 7258 is the best for use this purpose.
I really love sewing and i make an embroidery blog at: http://embroiderymachineworld.com/
Very nice post. Thanks for sharing such a useful post.
non woven fabric bag making machine
Post a Comment